Northeast Meridian
Ask a builder in a newer Northwest Meridian subdivision what a standard patio looks like, and they can show you the template used across the whole phase.
10 years building in Meridian
70+ outdoor kitchens completed
RCE-69511 Idaho registration
Reviewed by Janine Burrows Outdoor Kitchen Designer and Erica Jensen Office Manager, Outdoor Kitchen & Patio
Because Northeast Meridian developed gradually rather than in planned subdivision phases, the patios here reflect whatever standard was common when each individual home was built, not a single shared blueprint. A slab poured decades ago may be thinner, differently shaped, or oriented differently than one poured more recently just down the street, even though both sit in the same “established” part of the city.
That means a design here can’t lean on any assumption about what a typical Northeast Meridian patio looks like. It has to start from an actual measurement and assessment of your specific slab.
Local Planning

Design still starts with how you cook and entertain, but on an individually built Northeast Meridian property, it also starts with confirming what your existing patio actually is: how old it is, what condition it’s in, and whether it was built to a thickness and depth that can support the kitchen you have in mind, or whether it needs to be extended or reinforced first.
That variability is actually an advantage in one sense. Without a shared builder template constraining the design toward one standard shape, a design here has more freedom to respond to your property’s specific quirks, whether that’s an oddly angled lot line or a patio that was clearly poured to fit around a mature tree that’s still there today.
Regional Considerations
Because homes here were built at different points over several decades, the design should account for the possibility that your existing slab was poured to an older, less current footing or thickness standard, which is worth confirming before deciding whether to build around it or replace it. Idaho’s freeze/thaw conditions apply regardless of when the patio was poured, so the design needs to plan for adequate footing depth going forward even if the original slab predates today’s requirements.
Established landscaping also plays into this differently than it would on a newer lot, since existing shade and windbreak from decades-old trees can reduce how much a new structure needs to compensate for exposure.
No two patios in Northeast Meridian were built the same way. Let's find out exactly what yours actually is.
Get a Free Site MeasureWe come out and tell you what you are allowed to build before anything is drawn. On site, at no cost.
Or call (208) 856-3233Layout Options
There’s no single “correct” outdoor kitchen layout. The right one depends on your footprint, how many people usually cook or gather at once, and how the space connects to the rest of the yard.
The simplest layout to plan and build, and often the practical choice if your specific slab’s age or condition limits extension options.
Adds a second counter run at a corner, separating prep from cooking without needing a large footprint. Often the most workable shape for an individually built patio’s existing footprint.
Wraps seating or prep space around three sides, which can work well for larger gatherings but needs more room to avoid feeling tight.
Two parallel counter runs facing each other, useful when more than one person is cooking or prepping at the same time.
A freestanding layout that can anchor a larger patio, realistic if your specific slab was poured generously by the standards of its era.
Design Process & Deliverables
Reviewing your specific patio’s age, condition, thickness, and shape, since no two properties here share a template.
Working out zones, traffic flow, and appliance placement based on your habits and your slab’s actual dimensions.
Early guidance on countertop, cabinet, and finish options that complement your home’s specific era and style.
Visual drawings that show the layout in context before construction begins.
Documentation prepared to support the permitting process where required.
Not sure what your specific patio can actually support? That's exactly what the design phase confirms.
Get a Free Site MeasureDesign Planning
Every design here starts with a genuine, individual assessment rather than a shared assumption, since your home’s construction era and original builder shaped your patio in ways that may have nothing in common with the house next door. That means confirming slab age, thickness, and condition before layout preferences even enter the conversation.
From there, the design accounts for utility access, established shade, and your home’s specific architectural period, building a plan that fits your property rather than a generic “established Meridian” template.
Process
Confirm your patio’s age, thickness, condition, and shape, since it wasn’t built to any shared standard.
Establish cooking, prep, storage, and seating areas based on your habits and your slab’s real dimensions.
Work through layout options against your property’s individual footprint.
Develop 3D renders and elevations so the design can be reviewed and adjusted before construction.
Finalize drawings, including permit-ready documentation where the project requires it.
Local Area Context
Because Northeast Meridian grew gradually over decades rather than through planned subdivision development, its patios reflect a genuine range of ages, builders, and construction standards, with little in common from one property to the next beyond general neighborhood maturity. That makes an individual site assessment more essential here than in a newer part of the city where most homes share a builder template.
The design should follow your specific slab’s actual condition, not an assumption based on the neighborhood’s overall established character.
Recent Work
Our own work, photographed on site.




Approach
Compare straight run, L-shaped, U-shaped, galley, and island layouts.
See renders and elevations before committing to construction. Explore 3D Design
Best when redesigning an existing outdoor kitchen layout. Explore Remodel
Plan shade and weather protection into your layout. Explore Covered Kitchens
Related
Start with a real assessment, not an assumption. We'll confirm what your specific Northeast Meridian slab can support and design around it.
Or call (208) 856-3233Common Questions
Design cost depends on the scope of the drawings, whether 3D renders are included, and how much site-specific assessment your particular patio requires. Since this varies by project, it’s best worked out through a direct conversation about your space.
Homes in this area were built individually over several decades rather than through a single subdivision development, so patios reflect whatever standard was common when each specific home was constructed.
Often, yes, though the patio’s specific age, thickness, and condition need to be assessed first to confirm what it can support or whether it needs reinforcement.
Not always, but having a layout worked out first often makes the construction process smoother, especially given how much individual patios vary here.
It depends on your specific slab’s dimensions, how many people typically cook or gather, and how the kitchen should connect to the rest of the space. There’s no shared answer across the area since patios vary so much.
Yes, including planning for adequate footing depth even if your existing slab predates current standards, along with orientation and established shade from mature landscaping.
Timelines vary based on scope, whether 3D renders are needed, and how much individual assessment your specific patio requires. It’s more useful to talk through your specific project than to quote a fixed timeframe.
Yes, though changes are easier to make before construction begins. That’s part of why the design phase exists, to work through those decisions early.
Every Northeast Meridian patio has its own story. Let's find out yours.
Get a Free Site MeasureFour things and we can call you back with something useful. No obligation.